Datatran - Sam4s SPS-300 Series Operator's And Programming Manual

SERVICE
SERVICE Key Program Notes
Option
DESC
NON-ADD #
COMP
PRINT ON
RECEIPT
NEGATIVE
BALANCE IN
MGR CONTROL
CALCULATE TAX1-4
COMPULSORY
VALIDATION
HARD CHECK
PRINTER PORT
(0-4)
SAM4s SPS-300 Operator's & Programming Manual v1.34
1. Press the SERVICE key to view the service function key options:
SERVICE KEY PROGRAMMING
DESC : SERVICE
NON-ADD # COMP
PRINT ON RECEIPT
NEGATIVE BALANCE
IN MGR CONTROL
CALCULATE TAX1
CALCULATE TAX2
2. Press CASH from the last field or press PAGE DOWN to view the second page
of service function key options:
SERVICE KEY PROGRAMMING
CALCULATE TAX3
CALCULATE TAX4
COMPULSORY VALID
HARD CHECK PRINTER
PORT(0-4)
3. Press CASH from the last field to return to the FUNCTION KEY PROGRAM
screen, or press CLEAR at any time to return to the FUNCTION KEY
PROGRAM screen without saving changes.
Entry Description
Alpha numeric You can program a unique descriptor. The default descriptor
12 character is SERVICE.
Y or N Select Y if you wish to force the entry of a non-add number
(i.e. a tax exempt #) before the key is used
Y or N Select N to not print on the receipt.
Y or N Select Y if you do not want the operator use this function in
REGISTER mode. When selected, the function is allowed
only in the X control lock position.
Y or N Select Y to calculate and add the appropriate tax
automatically when finalized with this key.
Y or N Choose Y to enforce validation if an optional printer with
validation capability is connected to an RS-232C port.
0-2 If you are using a hard check system, enter the RS232C port
number (1 or 2) where the optional guest check printer is
attached.


N
Y
N
Y
Y

Y

Y
N
0
Program Mode Programming • 233