Sam4s SPS-300 Series Operator's And Programming Manual page 131

RS232C Port Options
SAM4s SPS-300 Operator's & Programming Manual v1.34
1. At the S control lock position menu, press 8 for RS232C programming. The port
selection screen displays:
RS232 PORT
1. RS232 PORT 1
2. RS232 PORT 2
3. RS232 PORT 3
4. RS232 PORT 4
2. Enter the digit (1-4) corresponding to the port you wish to program. The
appropriate PORT PROGRAM screen displays:
PORT 1 PROGRAM PG1
BAUD RATE
0:9600 1:1200
3:4800 4:19200
6:57600 7:115200
PARITY CHECK
0:NONE 1:ODD
DATA BITS(0:8 1:7)
3. At each field, press CASH to view the selections. Enter the digit representing
your selection.
4. Press PAGE DOWN to view page 2 of the RS232C port program:
PORT 1 PROGRAM PG2
STOP BITS(0:1 1:2)
DEVICE FUNCTION
-------------------------------
0:NONE 1:PC
3:RJ 4:RP
6:SCAN 7:COIN
9:POLE 10:EFT
2:2400
5:38400
2:EVEN
2:SCL
5:LIQUOR
8:RESERVED
11:PDC
S-Mode Programming • 131
0

0
0
0

0