Program Scans - Sam4s SPS-300 Series Operator's And Programming Manual

Mix & Match Name
Each Mix & Match discount function can be programmed with a unique 12-character
descriptor. The number of Mix & Match discounts is set in memory allocation. See "Mix &
Match Program" on page 112 for more information.
248 • Program Mode Programming
1. From the LOGO DESC. PROGRAM screen, press 5 to display the MIX &
MATCH DESC. Screen:
MIX & MATCH DESC.
M & M 1 :
M & M 1
M & M 2 :
M & M 2
M & M 3 :
M & M 3
2. Using the alpha numeric keyboard overlay (SPS-320/SPS-340, type the
descriptor. For the SPS-345 use the descriptor code method (see page 117.)
Each descriptor can be up to 12 characters. If you make a mistake, press the
BACKSPACE key (on the alpha overlay or enter the backspace code 97 if you
are using the descriptor code method) to erase the previous character. After you
have completed typing the first descriptor, press CASH to accept the new
message and advance to the next descriptor or press CLEAR to return to the
LOGO DESC. PROGRAM screen without making any changes.
3. Press CASH repeatedly, or press PAGE UP and/or PAGE DOWN to locate the
next mix & match descriptor you wish to program. After the last item on each
screen, the screen shifts to display the next 3 mix & match descriptors. Using the
same procedure, continue programming each line as necessary. Press CLEAR at
any time to exit and return to the LOGO DESC. PROGRAM screen.
SAM4s SPS-300 Operator's & Programming Manual v1.34

