Program Mode Programming; Descriptor Programming Methods; Program Overlay Method - Sam4s SPS-300 Series Operator's And Programming Manual

Read Carefully: Store Name Notes
The store name you set on System Option page 18 is used to identify program and report data
on the SD card. Note that the default store name is "STORE_A".
If you are using the SD Card to move information to a PC or use the program or report data
with the PC Utility, you must pay close attention to the store name. Do not use characters
such as "-" or "/" that cannot be used in naming a folder on your PC. If you use such a
character in your store name, you will not be able to read the files on your PC.
The Store Name field is 8-characters in length. If the store name is set to less than 8-
characters, the 5-digit register number will be combined with the store name to create a
unique 8-character identifier. For example, if the store name is "AAAAAA" and the register
number is 05, the folder for the store data (both the PGMBACK and the REPBACK) will be
named "AAAAAA05"; if the store name is "DDD" and the register number is "12345", the
folder name will be "DDD12345".
Note: If you are Using an SD Card for the First Time . . .
NOTE: You must a use an SD card with a capacity of 1GB or smaller. SD cards must be
formatted as FAT 32.
CAUTION: Formatting the SD card will clear all data on the SD card and prepare it for use.
1. Start Windows Explorer.
2. Select the SD card drive, right click and select Format. (Win XP screen shown; slightly
different procedures are used with different operating systems.)
3. From
File System: FAT32.
SAM4s SPS-300 Operator's & Programming Manual v1.34
the Format dialog, you must select
Select
"Format..."
S-Mode Programming • 137
the