Sam4s SPS-300 Series Operator's And Programming Manual page 34

6. The display reads: RAM (16M). After a short delay, the message: "OK" will display
7. If you have an ER-320 (one printer station), press CLEAR.
8. The display now reads: "
9. The SERVICE MODE menu displays. The RAM Clear procedure is complete and
34 • Getting Started
if the RAM check is good. Memory is cleared, the default program is installed and
the RAM CLEAR receipt is printed. The display now reads:
2-STATION PRINTER : 'CASH' Key
1-STATION PRINTER : 'CLEAR' Key
If you have an ER-340 (two printer stations), press CASH.
AUTO CUT : 'CASH' Key
NO CUT : 'CLEAR' Key
Press CLEAR.
the receipt prints
"ETHERNET LINK FAIL!!!" if the register is not connected to another register in
the network.
The receipt will print the message: "ETHERET LINK SUCCESS!!!" if the register is
connected to another network register.
DATE 07/01/2011 FRI TIME 08:37
================================
RAM ALL CLEAR OK !
================================
RAM (16M) OK
FLASHROM INFORMATION
VERSION :
CHECKSUM :
BOOT/APP :
MAY. 10 2012
CLERK 00 000001
USA 01.027
A6D8
0806/9ED2
00000
SAM4s SPS-300 Operator's & Programming Manual v1.34