DataTran (Debit) Operation Menu
SAM4s SPS-300 Operator's & Programming Manual v1.34
From the RESET REPORT MODE menu press 9 to display the DATATRAN
1.
(DEBIT) Operation menu:
DATATRAN OPERATION
0.PIN PAD INITIALIZE
1.CLOSE BATCH(DEBIT)
2. From the DATATRAN OPERATION (DEBIT) menu:
Press 0 to initialize the Pin Pad.
Press 1 to close the debit batch. You will be prompted "Are you sure?"
Press the YES/NO key to toggle to "YES" and press "CASH" to continue.
3. From the RESET REPORT MODE menu press 00 to display the DataTran
Operation menu:
DATATRAN OPERATION
0.INITIALIZE EFT
1.OPEN BATCH
2.CLOSE CURR. BATCH
4.CHG. BATCH NUMBER
5.ISSUE LOCAL TOTAL
6.ISSUE TRANSACTION
4. If necessary, press PAGE DOWN to display the second page of the DataTran
Operation menu:
DATATRAN OPERATION
7.ISSUE BATCH STATUS
8.DIAL IN LOAD
9.DIAL OUT LOAD
00.TIP OPERATION
.
Z Mode • 117