Sam4s SPS-300 Series Operator's And Programming Manual page 83

Fast Food Drive Thru
For fast food drive thru windows, the SPS-300 has the capability of storing orders when they
are taken, and then recalling the next order automatically at the payment window. (Note:
Drive thru storing & recalling must be done at the same register.)
See "Function Key Programming" in the "Program Mode Programming" chapter.
Taking a Drive Thru Order
1. Register the items you wish to sell.
2. Press the CHECK # key to begin an
automatically assigned check:
CHECK#
3. To store the posting, press SERVICE:
SERVICE
Paying a Drive Thru Order
1. Press the PBAL key:
PBAL
2. If necessary, add additional items,
register discounts or coupons.
3. Pay the balance as you would normally
tender a transaction, with CASH,
CHECK, or one of the CHARGE
functions. If the tender is greater than
the balance due, change is displayed.
5
SAM4s SPS-300 Operator's & Programming Manual v1.34

The PBAL function becomes a recall function when the drive thru feature is
enabled in the CHECK # function key program. Press the PBAL key to recall
the lowest tracking number balance.

Orders are stored by first pressing the CHECK # key to automatically assign the
next tracking number, then pressing SERVICE. (A macro sequence key could
be created to execute both functions sequentially by pressing the MACRO key.)
0 0 CASH
Receipt Example:
THANK-YOU
CALL AGAIN
DATE 06/05/2011 SUN
HAMBURGER
FRIES
CHECK #
PBAL
SERVICE
BFWD
CLERK 1 No.000011
Receipt Example:
THANK-YOU
CALL AGAIN
DATE 06/05/2011 SUN
CHECK #
PBAL
CHECKS PAID
TOTAL
CASH
CHANGE
CLERK 1 No.000012
TIME 08:33
$2.00
$1.00
# 3
$0.00
$3.00
$3.00
00001
TIME 08:33
# 3
$3.00
$3.00
$3.00
$5.00
$2.00
00001
Operations • 83