Sam4s SPS-300 Series Operator's And Programming Manual page 181

Option
CLERK INTERRUPT
PRG DESC BY CODE
AUTO CUTTER
USE SPOOL
MCR CLERK SIGN ON
USE TRACK 1&2
USE TRACK 3&4
RESERVED
STORE NAME
MIX & MATCH IS
TAXABLE
BACK LIGHT COLOR
SELECT LANGUAGE
PUERTO RICO RJ FLAG
ALLOW PRICE LEVEL
ONLY MGR MODE
DISPLAY ADD PRICE OF
LINKED ITEMS
ALLOW SALE WITH 0
STOCK
ALLOW Z STOCK RPT
EFT DRAFT IS
MSR CONNECTED
PIN PAD TYPE
PIN PAD (0-4)
SAM4s SPS-300 Operator's & Programming Manual v1.34
Entry Description
Y or N
Y or N When N, program descriptors by pressing the
appropriate key on the program overlay. When Y,
program descriptors by typing the code for each
descriptor character.
Y or N NOT USED.
Y or N Choose Y if the paper take-up spool is being used
(single printer models only.)
Y or N Choose Y to activate the optional card reader for clerk
operations.
0 or 1 Select the tracks read by the card reader: 1 and 2 or 3
and 4.
8 characters Stored files will be saved on SD/USB under a folder
with the store name. The default store name is
"STORE_A". Do not include spaces in the name.
If Y, mix and match discounts are taxable, resulting in
Y or N
tax being applied to the net sale amount, rather than the
gross amount.
0-7 0=ON (standard light blue backlight)
1=RED; 2=GREEN; 3= BLUE; 4=RED+GREEN;
5=GREEN+BLUE; 6=RED+BLUE
7=OFF (no backlight)
0, 1, 2 Converts system descriptors to selected language
Y or N` For Puerto Rico Only.
Choose Y to require the X Mode key to operate the
Y or N
Price Level keys.
Y or N When Y, the customer display shows a total of the item
and linked item. For example, if PLU is $1.00 and is
linked to PLU2 which is $0.25, the customer display
will show $1.25.
Y or N When N, inventory PLU's cannot be sold when stock
reaches "0".
Y or N When N, the operator is not allowed to clear (Z) stock.
Y or N Set EFT DRAFT to Y (DATATRAN) for a normal
draft. Set EFT DRAFT to N (FINE DINING) for a
draft with a tip entry line.
0, 1, or 2 Set MSR CONNECTED to 0 if the MSR is connected
to the DATATRAN. Set to 1 if the MSR is connected
to the PDC. Set to 2 if connected to the register.
Y or N Choose Y. (DUKPT is only type supported.)
0-4 Indicate port where PIN PAD is connected.
Program Mode Programming • 181