Clerk Programming; Clerk Programming - Reference Information - Sam4s SPS-300 Series Operator's And Programming Manual

Option
RESET Z COUNTER
AFTER Z1 REPORT
FINANCIAL REPORT
TIME REPORT
PLU REPORT
CLERK REPORT
GROUP REPORT
RESET Z COUNTER
AFTER Z2 REPORT
DAILY SALES RPT
PRINTER PAPER
SENSOR ACTIVE
DEACTIVATE SPLIT
PRICING
ALLOW DIRECT MULT
INVENTORY CNT PGM
Y:ADD CURR. LVL
N:COUNTER REPLACE
CURR LEVEL
GLOBAL ENTRY LIMIT
(0-14)
DISABLE PRICE LEVEL
KEY
LEVEL 1:
LEVEL 2:
LEVEL 3:
LEVEL 4:
LEVEL 5:
PRICE LEVEL IS
0:POP UP AFTER ITEM
1:POP UP AFTER SALE
2:STAYDOWN
SAM4s SPS-300 Operator's & Programming Manual v1.34
Entry Description
Y or N Choose Y or N to determine if you wish to reset the Z
counter after a Z1 of each report listed.
Y or N Choose Y or N to determine if you wish to reset the Z
counter after a Z2 of the daily sales report.
Y or N A built in paper sensor determines whether paper is
currently loaded in the printer. If Y, operations are not
allowed without paper loaded. If N, operations are
allowed when paper is out.
Y or N If N, both multiplication and split pricing calculations
can be done with the X/TIME key. If Y, only
multiplication can be done with the X/TIME key.
Y or N If Y, you can multiply preset items by simply entering
the quantity, then pressing the preset PLU key.
Y or N Choose Y or N to determine whether the quantity of
inventory you enter in the PLU stock program adds to
existing inventory quantity, or whether it replaces the
current inventory quantity.
0-14 Enter a digit to determine the number of numeric digits
that can be entered for any register function. Enter 0
for no limit.
Y or N You can choose to disable any of the price level keys
here.
0, 1, or 2 If you press a price level key, you have the option of
the level key applying only to the next item (0), having
the same level key apply to any subsequent item
registered in the same transaction (1), or having the
same level key apply to any subsequent item on any
subsequent transaction (2).
Note: Set to "Staydown" when using time activated
price levels. Also set level activate time in program
mode.
Program Mode Programming • 179