Tendering A Cash Sale; Tendering A Check Sale - Sam4s SPS-300 Series Operator's And Programming Manual

Paid Out Operations
You can use the PAID OUT function to track cash or checks paid out or to record loans from
the cash drawer.
Note: When a function is located on a function look up menu key, you access the
function by pressing the appropriate function look up key, then pressing the numeric
digit corresponding to the function you wish to select. On the default keyboard, the
PO1 function is function #4 on the function look up 1 menu, so to use the PO1 function,
you would first press FUNCTION LOOK#1, then press the numeric 4 key.
1. Press one of the paid out keys (PO1-
PO3) or select one of the paid out
functions from a function look up menu:
PO
2. Enter the amount of cash paid out, press
CASH.
1
3. Enter the check amount paid out, press
CHECK.
1
4. You can continue to itemize paid outs, or
you can finalize by pressing or selecting
the same paid out key.
PO
Subtotaling a Sale
1. Register the items you wish to sell.
2. Press SUBTL. The subtotal will display
with the message "Sub" indicated on the
rear display.
SUBTL
The subtotal can be printed if the system
option is set. See "Print Option
Programming" in the "Program Mode
Programming" chapter.
64 • Operations
0 0 0 CASH
0 0 0 CHECK
DATE 06/05/2011 SUN
PO1
CASH
CHECK
PO1
CLERK 1
SAM4s SPS-300 Operator's & Programming Manual v1.34
THANK-YOU
CALL AGAIN
TIME 08:33
-10.00
-10.00
-20.00
No.000011 00001