Sam4s SPS-300 Series Operator's And Programming Manual page 253

Clerk In/Out
The Clerk In/Out program allows you to edit actual punch in/out times for the day.
SAM4s SPS-300 Operator's & Programming Manual v1.34
1. From the PGM control lock position menu, press 00 for MORE. The
PROGRAM MODE page 2 screen displays.
2. From the PROGRAM MODE page 2 screen, press 0 for CLERK I/O. The
CLERK NUMBER screen displays:
CLERK NUMBER
CLERK NO? (1-10)
3. Type the number of the clerk you wish to edit and press CASH to display the
CLERK I/O PROG. screen:
CLERK I/O PROG.
IN 00.00.00
OUT 00.00.00
IN 00.00.00
OUT 00.00.00
IN 00.00.00
OUT 00.00.00
TIME WORKED:
4. The cursor will point at the date for the first time punch. Press CASH until the
cursor points at the field you wish to edit. Note that you can edit the last 20 time
punches, although only 6 dates/times display on the screen at one time. When
you leave the last field displayed on the current screen, your view will shift to the
next 6 dates/times

If you wish to edit a date, type a new date and press CASH. Be sure to enter
the date in a six digit format, i.e. enter July 8

If you wish to edit a time field, type the new time in a 24 hour (military)
format, i.e. enter 7:00 PM as 1900.
5. Note that when you edit time information, the TIME WORKED field is updated
with a new total. When you have completed editing, press CLEAR to return to
the CLERK NUMBER selection screen.
00:00

00:00
00:00
00:00
00:00
00:00
00:00
0

th
, 2011 as 070811.
Program Mode Programming • 253