Sam4s SPS-300 Series Operator's And Programming Manual page 190

Option
PRINT PLU # ON
RECEIPT
E.J. PORT
REPORT PORT
PRINT E.J FROM
Y:OLDEST N:NEWEST
NOT PRINT WHEN
POLLING REPORTS
PRINT PLU #
ON PLU REPORT
GRAND TOTAL IS
Y:NET N:GROSS
SEND ORDER TO KP
AT SUBTOTAL
PRINT DATE ON
SERV ON HARD CHECK
COPY OF DATATRAN
RECEIPT (0-99)
PRT WHOLE CARD NO.
PRT EXP. DATE
PRINT LAST LINE OF EJ
ORDER OF PLU
PRINTED ON KP BY
GROUP
PRINT GROUP DESC ON
KP
PRINT DATE LAST Z
REPORT ON Z REPORT
DISABLE LINE FIND ON
THE SLIP PRINTER
190 • Program Mode Programming
Entry Description
Y or N If Y, the PLU number and descriptor will print. If N,
only the PLU number will print.
0, 1, or 2 Choose a port for a remote printer to print electronic
journal reports instead of the register printer.
Choose a port for a remote printer to print reports
0, 1, or 2
instead of the register printer.
Y: Prints electronic journal from lowest consecutive
Y or N
number to highest.
N: Prints electronic journal from highest consecutive
number to lowest.
Choose Y if you would like to suppress register
Y or N
printing when reports are polled.
Y or N Determines whether PLU# is displayed on the report.
Y or N Choose Y if you wish the grand total to accumulate
daily net sales totals. Choose N if you wish the grand
total to accumulate daily gross sales totals.
Y or N Choose Y to print orders on the KP when the
SUBTOTAL key is pressed. Choose N to print orders
on the KP when the order is finalized.
Y or N If Y, the posting date will print at every posting on the
hard check.
0-99 Enter the number of copies of the DataTran (integrated
credit) receipts.
Y or N If N, only the last four digits of the credit/debit card
will print.
Y or N If N, the credit card expiration date will not print on the
DataTran (integrated credit) receipt.
00 Quick journal review (R-Mode/10 Subtotal) prints last
xx lines of electronic journal. (Where xx is 0-99.)
By default (N) KP items will print in the order they are
Y or N
entered. If Y, KP items are sorted by group with a
separate chit printed for each group. (v 1.046 or later)
If option above set to Y, choose Y here to print the
Y or N
group descriptor at the top of each KP chit. (v 1.046 or
later)
If Y, the Z report will print the date of the last Z report.
Y or N
(requires v1.083 or later)
If Hard Check system and optional slip printer are
Y or N
used, and this option = Yes, the automatic line find will
be disabled. Printing on the slip will begin where the
slip is inserted. (requires v01.130 or later)
SAM4s SPS-300 Operator's & Programming Manual v1.34