Memory Allocation - Sam4s SPS-300 Series Operator's And Programming Manual

DataTran Operation Menu
Initialize EFT
Select Initialize EFT to verify communications, software versions and installed networks.
List of Installed Networks
Status of Installed Networks
292 • Integrated Payment Appendix
1. Turn the control lock to the Clear Totals position to display the RESET
REPORT MODE menu.
2. Press 00 to display the DataTran Operation menu:
DATATRAN OPERATION
0.INITIALIZE EFT
1.OPEN BATCH
2.CLOSE CURR. BATCH
4.CHG. BATCH NUMBER
5.ISSUE LOCAL TOTAL
6.ISSUE TRANSACTION
3. If necessary, press PAGE DOWN to display the second page of the DataTran
Operation menu:
DATATRAN OPERATION
7.ISSUE BATCH STATUS
8.DIAL IN LOAD
9.DIAL OUT LOAD
00.TIP OPERATION
4. Review the explanations that follow and select the appropriate operation.
DATE 5/24/2011 THU TIME 16:15
** LIST INSTALLED NETWORRKS **
CHK DEN --- --- VER:3.89
OFF ON OFF OFF
EMPLOYEE1 NO.000019 REG 01
SAM4s SPS-300 Operator's & Programming Manual v1.34


Software Version