Sam4s SPS-300 Series Operator's And Programming Manual page 249

DataTran
When a DataTran integrated payment appliance is connected, you can print a message of up
to four lines on the electronic payment draft receipt.
SAM4s SPS-300 Operator's & Programming Manual v1.34
1. From the LOGO DESC. PROGRAM screen, press 6 to display the
DATATRAN MESSAGE screen:
DATATRAN MESSAGE
LINE 1 :
LINE 2 :
LINE 3 :
2. Using the alpha numeric keyboard overlay (SPS-320/SPS-340, type the
descriptor. For the SPS-345 use the descriptor code method (see page 117.)
Each line can contain up to 32 characters. If you make a mistake, press the
BACKSPACE key (on the alpha overlay or enter the backspace code 97 if you
are using the descriptor code method) to erase the previous character. After you
have completed typing the first line, press CASH to accept the new message and
advance to the next line, or press CLEAR to return to the LOGO DESC.
PROGRAM screen without making any changes.
3. Press CASH repeatedly, or press PAGE UP and/or PAGE DOWN to locate the
next line of the message you wish to program. After the last line on the first
page, the screen shifts to display line #4 of the message. Using the same
procedure, continue programming each line as necessary. Press CLEAR at any
time to exit and return to the LOGO DESC. PROGRAM screen.


Program Mode Programming • 249