Sam4s SPS-300 Series Operator's And Programming Manual page 169

Programming a VAT (Value Added Tax)
When a tax is included in the cost of the item, you can use the value added tax (VAT) program
to calculate the tax share of each sale.
SAM4s SPS-300 Operator's & Programming Manual v1.34
1. Turn the control lock to the PGM position.
2. From the PROGRAM MODE menu, press 2 to view the TAX PROG. screen:
TAX PROGRAMMING
TAX NUMBER (1-4)
DESC : TAX1
TAX TYPE (0-2)
0 : ADD-ON
1 : TAX TABLE
2 : VAT
3. When the arrow is pointed at the TAX NUMBER field, enter the number of the
tax you wish to program. (There are four taxes available, enter 1, 2, 3, or 4.) The
arrow will move to the TAX TYPE field.
4. Enter 2 for VAT. The appropriate TAX # PROGRAMMING screen displays:
TAX #1 PROGRAMMING
TAX RATE
5. When the arrow is pointed at the TAX RATE field, enter the VAT rate. For
example if the tax is 6 percent, enter 6.000 or 6.0. If the tax is 7.5 percent, enter
7.500 or 7.5 using the decimal key. If the tax is 10 percent, enter 10.000 or 10.
Press CASH to set the rate.
6. The TAX PROG. screen will return, prompting you to enter the next tax, if
necessary. Continue to program additional taxes or press CLEAR to return to
the PROGRAM MODE screen.
1

0
0.000

Program Mode Programming • 169