Waste - Sam4s SPS-300 Series Operator's And Programming Manual

MODIFIER 1-5 Key Program Notes
Option
DESC
UNDER MGR
CONTROL
AFFECT PLU #
PRINT ON CHECK
PRINT ON
RECEIPT
AFFECT DIGIT 1-
14
VALUE OF
AFFECTED DIGIT
(0-9)
SEND
DESCRIPTION TO
KP
DISPLAY
DESCRIPTOR ON
LCD
SAM4s SPS-300 Operator's & Programming Manual v1.34
Entry Description
Alpha You can program a unique descriptor. The default descriptors
numeric are MOD1 - MOD5.
12 character
Y or N Select Y if you do not want the operator use this function in
REGISTER mode. When selected, the function is allowed
only in the X control lock position.
Y or N Select Y, if you wish the modifier entry to modify the PLU
and cause a different item/price to be registered. Select N to
only add the modifier descriptor.
Y or N Select N to suppress printing of the modifier descriptor on the
guest check.
Y or N Select N to suppress printing of the modifier descriptor on the
receipt.
1-14 Preceding a PLU with a Size and/or Modifier key manipulates
the PLU code assigned to the PLU key, causing a different
PLU to be registered when the PLU key is pressed. Enter the
digit of the PLU number you wish to be changed when using
this key. (Digit #1 is the rightmost digit; digit #14 is the
leftmost digit.)
Enter the value you wish to be added in the digit position
0-9
selected. For example, if you wish to affect PLU digit #4
with a value of 1, then pressing this modifier key prior to the
registration of PLU #17 will result in the registration of PLU
#1017.
Determines whether the modifier descriptor prints with the
Y or N
item at the KP. (The modifier descriptor will print
immediately above the item.)
Y or N Option to display modifier descriptor is available on version
1.046 or later.
Program Mode Programming • 225