Check Cashing; Split Tender - Sam4s SPS-300 Series Operator's And Programming Manual

Totaling a Charge Sale
Use the charge keys to track charge or credit card sales. See "Function Key Programming" in
the "Program Mode Programming" chapter to change the descriptors for the charge tender
functions. For example, you can use CHARGE 1 to track Visa card sales. The descriptor
"VISA" will display on the function look up menu and print on the printer. You can also set
tendering options for the charge keys, i.e. whether to allow over tendering or to enforce
tendering.
Note: When a function is located on a function look up menu key, you access the
function by pressing the appropriate function look up key, then pressing the numeric
digit corresponding to the function you wish to select. On the default keyboard, the
CHARGE 1 function is function #1 on the function look up 2 menu key. So, to use the
CHARGE 1 function, you would first press FUNCTION LOOK#2, then press the
numeric 1 key.
1. Register the items you wish to sell.
2. Press one of the charge key if it is located
on the keyboard:
CHA RGE
or, if the charge function is located on a
function look up key press
FUNCTION LOOK2, then press the
digit representing the charge function
you are using:
FUNC
LOOK#2
SAM4s SPS-300 Operator's & Programming Manual v1.34
1
1
THANK-YOU
CALL AGAIN
DATE 06/05/2011 SUN
PLU1 T1
PLU1 T1
4X $1.99
PLU2
TAX1
TOTAL
CHARGE1
CLERK 1 No.000011
TIME 08:33
$2.99
$2.99
$7.96
$0.36
$14.30
$14.30
00001
Operations • 67