Editing An Existing Macro - Sam4s SPS-300 Series Operator's And Programming Manual

Endorsement Message
The Endorsement Message is a programming message of up to ten lines of 32 characters that
prints when a check is endorsed on an optional slip printer.
SAM4s SPS-300 Operator's & Programming Manual v1.34
1. From the LOGO DESC. PROGRAM screen, press 2 to display the
ENDORSEMENT MESG. Screen:
ENDORSEMENT MESSAGE
LINE 1 :
LINE 2 :
LINE 3 :
2. Using the alpha numeric keyboard overlay (SPS-320/SPS-340, type the
descriptor. For the SPS-345 use the descriptor code method (see page 117.)
Each line can be up to 32 characters. If you make a mistake, press the
BACKSPACE key (on the alpha overlay or enter the backspace code 97 if you
are using the descriptor code method) to erase the previous character. After you
have completed typing the first line, press CASH to accept the new message and
advance to the second line, or press CLEAR to return to the LOGO DESC.
PROGRAM screen without making any changes.
3. Using the same procedure, continue programming each line as necessary. Press
CLEAR at any time to exit. After programming the third line, the next three
lines display:
ENDORSEMENT MESSAGE
LINE 4 :
LINE 5 :
LINE 6 :
4. Continue programming all ten lines if necessary. When the last line has been
entered, press CASH to accept the message and return to the LOGO DESC.
PROGRAM screen.




Program Mode Programming • 245