Machine No; Training Mode Password - Sam4s SPS-300 Series Operator's And Programming Manual

Financial Report
The Financial Report selection allows you to reprogram the descriptors that appear with the
Financial Report totals and counters. For example, the first total on the financial report
"+PLU TTL" represents the total of all positive PLU entries. You might wish to re-label this
total to say "FOOD SALES". You can reprogram any of the Financial Report totals listed
here with any 12-character descriptor.
246 • Program Mode Programming
1. From the LOGO DESC. PROGRAM screen, press 3 to display the
FINANCIAL REP MESG. Screen:
FINANCIAL REP MESSAGE
TTL 1 :
+PLU TTL
TTL 2 :
-PLU TTL
TTL 3 :
ADJST TTL
2. The first 3 report descriptors (TTLs 1-3) display with the cursor arrow pointing at
the first descriptor. Using the alpha numeric keyboard overlay (SPS-320/SPS-
340, type the descriptor. For the SPS-345 use the descriptor code method (see
page 117.) Each descriptor can be up to 12 characters. If you make a mistake,
press the BACKSPACE key (on the alpha overlay or enter the backspace code
97 if you are using the descriptor code method) to erase the previous character.
After you have completed typing the first descriptor, press CASH to accept the
new message and advance to the next descriptor, or press CLEAR to return to
the LOGO DESC. PROGRAM screen without making any changes.
3. Press CASH repeatedly, or press PAGE UP and/or PAGE DOWN to locate the
descriptor you wish to program. After the last item on each screen, the screen
shifts to display the next 3 descriptors. (There are 73 Financial Report
descriptors that you may program.) Using the same procedure, continue
programming each line as necessary. Press CLEAR at any time to exit and
return to the LOGO DESC. PROGRAM screen.
SAM4s SPS-300 Operator's & Programming Manual v1.34

