System Option Programming - Sam4s SPS-300 Series Operator's And Programming Manual

Group Programming
Up to 99 groups (the exact number is determined by memory allocation) are available to
summarize PLU sales. Group totals appear on reports, so that you can track sales of different
types of items.
To Program Groups
160 • Program Mode Programming
 The group descriptors programmed here will replace the default descriptors
GROUP 1 through GROUP 99 that appear on reports.
 Each PLU can report totals to one, two or three different groups. If a PLU sends
totals to more than one group, the group total that appears on the Group report
will not represent PLU sales. Therefore, you also have the option of deciding
whether each group's total will add to the group total on the Group report.
1. At the PGM control lock position menu, press 1 for GROUP. The GROUP
PROGRAMMING screen displays: (The maximum group number is set by
memory allocation.)
GROUP PROGRAMMING
GROUP NO? (1-20)
2. Enter the number of the group to be programmed, press CASH. The GROUP#
PROGRAMMING screen displays:
GROUP #1 PROGRAMMING
DESC : GROUP 1
ADD TO GROUP TTL
SEND TO KP
KP PORT# :
SAT.
SER.
PRINT RED ON KP
1 2 3 4 R
N N N N Y
N N N N
SAM4s SPS-300 Operator's & Programming Manual v1.34
0


Y
N
N