Check Tracking Operations; Overview - Sam4s SPS-300 Series Operator's And Programming Manual

Food Stamp Sales
The SPS-300 is capable of sorting food stamp and non-food stamp eligible items. If a
customer chooses to pay by food stamps, the eligible total can be subtotaled and food stamp
payments accepted. NOTE: The ability to process integrated EBT transactions was added at
firmware version 1.034.
If you choose to use this feature, you must:
Refer to the "Service Mode Programming" and the "Program Mode Programming" chapters
to make the appropriate settings.
1. Register the items you wish to sell. You
do not need to sort food stamp eligible or
non-eligible items. The SPS-300 will
maintain a subtotal of eligible items
based upon the pre-programmed status
for each PLU.
If you wish to register a normally food
stamp eligible item into a PLU
programmed as non-food stamp eligible,
press the F/S SHIFT key before
registering the item. In the same manner,
you can register non-food stamp items
into food stamp eligible PLU's.
2. If a customer wishes to pay with food
stamps, press the F/S SUB key to display
the food stamp eligible total:
F/S SUB
3. Enter the amount of food stamps
tendered by the customer. For example,
for $20.00 enter:
2
4. The remaining amount due displays.
(Note, depending upon programming,
change less than $1 can be applied to the
balance.)
5. Total or tender the remaining balance.
SAM4s SPS-300 Operator's & Programming Manual v1.34

Locate the appropriate function keys on the keyboard, F/S SHIFT, F/S SUB,
and F/S TEND, and then set the appropriate options for the F/S TEND key.

Determine and set the food stamp status for each PLU item or category.
F/S
0 0 0
TEND
THANK-YOU
CALL AGAIN
DATE 06/05/2011 SUN
PLU1 F
PLU2
TOTAL
F/S TOTAL
F/S TEND
F/S CRT AMT
TOTAL
CASH
CHANGE
F/S/ CHANGE
CLERK 1 No.000011
TIME 08:33
$1.29
$4.29
$5.58
$1.29
$20.00
$0.71
$3.58
$5.00
$1.42
$18.00
00001
Operations • 71