Irc Options - Sam4s SPS-300 Series Operator's And Programming Manual

Hardware Test
Various components of the SPS-300 are tested by using this program.
Hardware Test Table
TEST
PRINTER
DISPLAY
KEYBOARD
MODE
SAM4s SPS-300 Operator's & Programming Manual v1.34
1. From SERVICE MODE menu press 0 to display the H/W TEST menu:
0. TEST PRINTER
1. TEST DISPLAY
2. TEST KEYBOARD
3. TEST MODE
4. TEST RS-232
5. TEST MCR
6. TEST DALLAS
2. From SERVICE MODE menu press PAGE DOWN to display the H/W TEST
menu:
7. TEST SD CARD
8. PRINTING PATTERN
3. Press the digit representing the test you wish to perform. See the table that
follows for notes about each test.
NOTES
A printer test pattern is printed. The H/W TEST menu automatically
returns when the test is complete.
A display test is initiated. The H/W TEST menu automatically
returns when the test is complete.
The display indicates: "KEYBOARD TEST". Press any key location
to display its' position. Turn the key lock to end the test.
Check the mode lock and/or the optional "real" clerk key lock with
this test. As you turn the key lock, the display will show the current
position. The display will also indicate the "real" key that is
inserted. Return the key to the SERVICE position to end the test.
H/W TEST
H/W TEST


S-Mode Programming • 121