Table - Sam4s SPS-300 Series Operator's And Programming Manual

FUNCTION LOOK UP (1-2)
Two function keys (FUNCTION LOOK 1and FUNCTION LOOK 2) are available to
access up to eight functions each. You can use function look up keys to locate functions that
are necessary for your application, but may not fit on the keyboard layout, or to locate
functions that are used only occasionally.
With this program, you can determine which functions are located on each function look up
key, and you can also access these functions for option programming.
218 • Program Mode Programming
1. Press the FUNCTION LOOK UP 1 or FUNCTION LOOK UP 2 key to view
the appropriate function program menu screen:
FUNC #1 PROGRAM
0. MENU ASSIGNMENT
1. STATUS PROGRAM
2. Press 0 to select the menu assignment on the function look-up key or press 1 to
program the options for a function on the function look-up key. If you are
programming function key options, refer to each function separately in this
chapter to set function options. If you chose 0 to program menu assignment, the
FUNC. # MENU ASSIGN screen displays:
FUNC #1 MENU ASSIGN.
PUSH MENU NUMBER TO
BE PROGRAMMED (1-8)
SAM4s SPS-300 Operator's & Programming Manual v1.34
0
