Train Mode - Sam4s SPS-300 Series Operator's And Programming Manual

VOID
Note: The "CLOSED" message will display if a clerk is not signed on.
X (Manager Mode)
16 • Introduction
VOID MODE
██████████
█ CLOSED █
██████████
MANAGER MODE
0.MANAGER OPERATION
1.X REPORTS
2.DECLARATION
3.REG. PRINT FORMAT
4.STOP RECEIPT PRINTING
5.STOP JOURNAL PRINTING

6.TRAIN MODE

 Press PAGE DOWN to view the remainder of the X MODE menu:
PROGRAM MODE
7.E.J. OPERATION
8.NOT FOUND PLU
9.OPEN CHECK(IRC)
SAM4s SPS-300 Operator's & Programming Manual v1.34
