Logo Descriptor
Preamble
The preamble is a programming message of up to six lines of 32 characters that appears at the
top of each receipt and/or guest check.
242 • Program Mode Programming
From the PGM control lock position menu, press 7 for LOGO DESC. The
LOGO DESC. PROGRAM screen displays:
LOGO DESC. PROGRAM
0.PREAMBLE
1.POSTAMBLE
2.ENDORSEMENT MESSAGE
3.FINANCIAL REPORT
4.CLERK REPORT
5.MIX & MATCH NAME
6.DATATRAN
1. From the LOGO DESC. PROGRAM screen, press 0 to display the
PREAMBLE screen:
LINE 1 :
LINE 2 :
LINE 3 :
2. Using the alpha numeric keyboard overlay (SPS-320/SPS-340, type the
descriptor. For the SPS-345 use the descriptor code method (see page 117.)
Each line can be up to 32 characters. If you make a mistake, press the
BACKSPACE key (on the alpha overlay or enter the backspace code 97 if you
are using the descriptor code method) to erase the previous character. After you
have completed typing the first line, press CASH to accept the new line and
advance to the second line, or press CLEAR to return to the LOGO DESC.
PROGRAM screen without making any changes.
PREAMBLE
SAM4s SPS-300 Operator's & Programming Manual v1.34