Sam4s SPS-300 Series Operator's And Programming Manual page 168

Tax Table Programming Example - Illinois 6% Tax Table
168 • Program Mode Programming
1. Examine the printed tax table for the tax you are programming.
2. Calculate the break point differences by subtracting the high side of the previous
range from the high side of the sale amount range.
3. Examine the pattern of break point differences to determine when the break
points begin to repeat. Mark the beginning break points that do not fit a pattern
as "non-repeat breaks." Mark the break points that are repeating in a pattern as
"repeat breaks." Count the number of repeat and non-repeat breaks.
Tax Charged
$0.00
$0.01
$0.02
$0.03
$0.04
$0.05
$0.06
$0.07
$0.08
$0.09
$0.10
$0.11
$0.12
$0.13
$0.14
Sale Amount Break point
Range Differences
$0.00 - $0.10
$0.11 - $0.21 11
$0.22 - $0.38 17
$0.39 - $0.56 18
$0.57 - $0.73 17
$0.74 - $0.91 18
$0.92 - $1.08 17
$1.09 - $1.24 16
$1.25 - $1.41 17
$1.42 - $1.58 17
$1.59 - $1.74 16
$1.75 - $1.91 17
$1.92 - $2.08 17
$2.09 - $2.24 16
$2.25 - $2.41 17
SAM4s SPS-300 Operator's & Programming Manual v1.34
Non-Repeat
Repeat