Keyboard Plu Repeat Entry; Keyboard Plu Multiplication - Sam4s SPS-300 Series Operator's And Programming Manual

Item Registrations
All registrations are accumulated into PLU's. Keyboard PLU's are fixed keys on the
keyboard (like traditional department keys) that access specific PLU's.
As you make item registrations, you can follow your entries by viewing the display.
Remember that the sale and tax totals are updated automatically with each entry.
Using Function Look-Up Keys
Because the SPS-300 keyboard is programmable, both the selection and location of function
keys may vary from one register to another.
You must pay particular attention to the two function look-up keys, FUNCTION LOOK-UP
#1 and FUNCTION LOOK-UP #2. Each of these keys can contain a list of up to 8
functions that can be used as if they were located on separate keys. For example:
SAM4s SPS-300 Operator's & Programming Manual v1.34

Depending upon the specific model and the program installed, there will be
different number of keyboard PLU keys. Flat keyboard models (SPS-320 and
SPS-340) provide 100 PLU's on the default keyboard. The raised key model
(SPS-345) provides 21 PLU's keys in the standard configuration. This can be
expanded by your dealer to 63 PLU's. Your specific program may have a more
or less PLU keys depending upon how key locations are set.

Traditional code-entry PLU's can also be registered by entering the PLU number
and pressing the PLU key.

If optional scanning is implemented, the PLU number corresponds to the UPC
number and a PLU is registered when an item is scanned.

If a function, such as CHARGE1, is located on a function look-up key, as it is on
the default keyboard, then you must access it by pressing the appropriate function
look-up key, then pressing the digit that represents the function, instead of
pressing a key on the keyboard.

If you need to make a numeric entry before a function that is located on a
function look-up key, first press the numeric key or keys, then press the function
look-up key and press the digit that represents the function you wish to select.
Operations • 43