Sam4s SPS-300 Series Operator's And Programming Manual page 145

Update Program Area
SAM4s SPS-300 Operator's & Programming Manual v1.34
buttons.
8. Click SEL. find the folder where the update files are located and select
SPS300.bin.
9. Select Boot Area Only in the Select One option buttons.
10. Press OK Button. The download takes about 30 seconds; the scroll bar will
track the progress of the download. At the ECR, the display will flash slowly
while the update is taking place.
11. When complete, the message Completed displays on the PC. Click OK and
the Download program will close. At the ECR, the display will change to a
green color indicating the update is complete. Turn the power switch to the
OFF.
1. Connect the Serial Cable from ECR to PC.
2. At the register, turn the control lock to the S position.
3. Turn the power switch to the OFF position.
4. Press and hold the CASH and CLERK keys. (Use the keys in their default
locations, the upper-right and lower-right keys on the keyboard.)
5. While continuing to hold the CASH and CLERK keys, turn the power
switch to the ON position. (The display will illuminate and the error tone
will sound beep-beep-beep in quick succession.) Release the keys.
6. At the PC, execute the program "NEWNET_DOWN.exe". The Download
dialog box displays.
7. Select the appropriate com port connection at your PC at the PORT# option
buttons.
8. Click SEL. find the folder where the update files are located and select
SPS300.bin.
9. Select Program code + Font in the Select One option buttons.
S-Mode Programming • 145