Programming A Vat (Value Added Tax) - Sam4s SPS-300 Series Operator's And Programming Manual

Delete PLU Range
Note: To delete PLU's, all totals for the PLU's must be cleared from Z reports
(including Stock and PLU reports.)
158 • Program Mode Programming
1. From the PLU PROGRAMMING screen, press 1 for to display the DELETE
PLU screen:
DELETE PLU
0.DELETE ONE PLU
1.DELETE PLU RANGE
2. Press 1 to delete a range of PLU's. The PLU NUMBER screen displays:
PLU NUMBER
* ENTER NUMBER OF
THE FIRST PLU IN THE RANGE
AND PUSH PLU
3. Enter the number of the first PLU in the range you wish to delete and press PLU.
The screen prompts for the last PLU in the range:
PLU NUMBER
* ENTER NUMBER OF
THE LAST PLU IN THE RANGE
AND PUSH PLU
SAM4s SPS-300 Operator's & Programming Manual v1.34
0

0
