Function Keys - Sam4s SPS-300 Series Operator's And Programming Manual

Currency Conversion
If you normally accept currency from neighboring nations, you can program the SPS-300 to
convert the subtotal of a sale to the equivalent cost in the foreign currency. You can set up to
four separate conversion functions for different foreign currencies. To do this, you need to
program the conversion factor. For example, if the US dollar (home currency) is worth
1.3720 Canadian dollars (foreign currency), the conversion factor is 1.3720. See "Function
Key Programming" in the "Program Mode Programming" chapter to set a conversion factor.
Note: When a function is located on a function look up menu key, you access the
function by pressing the appropriate function look up key, then pressing the numeric
digit corresponding to the function you wish to select. On the default keyboard, the
CONV1 function is function #7 on the function look up 1 menu, so to use the CONV1
function, you would first press FUNCTION LOOK#1, then press the numeric 7 key.
1. Register the items you wish to sell.
2. Press the CONV1 key if it is located on
the keyboard:
CONV1
or, if the conversion is located on a
function look up key press FUNCTION
LOOK2, then press the digit
representing the CONV1 function:
FUNC
LOOK#2
3. The amount due in foreign currency is
displayed.
4. Enter the amount of the foreign currency
tender, Press CASH:
1
5. The display will indicate the amount of
foreign currency tendered and display
$5.17 change due. The change due is
computed in home currency!
72 • Operations
7
0 0 0 CASH
DATE 06/05/2011 SUN
PLU1 T1
TAX1
TOTAL
CONV 1
CHANGE RATE
HOME AMT.
CHANGE
CLERK 1
The currency symbol you
program will display here. See
"Print Option Programming" in
the "Program Mode
Programming" chapter.
SAM4s SPS-300 Operator's & Programming Manual v1.34
THANK-YOU
CALL AGAIN
TIME 08:33
$2.00
$0.12
$2.12
¥2.90
@1.3720
$10.00
$5.17
No.000011 00001