Keyboards - Sam4s SPS-300 Series Operator's And Programming Manual

Control Lock
The control lock has 7 positions, accessed with 5 keys. Each ECR is shipped with two full
sets of keys.
VOID
Before performing any operations in Register Mode, a clerk must be signed on. See "Clerk
Sign-On/Sign-Off" for a description of clerk operations.
Control Keys
All SPS-300 series models include two sets of keys that may be used to access the following
control lock positions.
Note: Keys may be removed from the control lock in the OFF or REG positions.
SAM4s SPS-300 Operator's & Programming Manual v1.34
VOID Use to void (correct) items outside of a sale.
OFF
OFF
REG
REG
X
X
Z
Z
P
P
S
S
Key Positions Accessible
REG OFF, REG
VD VOID, OFF, REG, X
Z VOID, OFF, REG, X, Z
P VOID, OFF, REG, X, Z, P
C ALL POSITIONS
The register is inoperable.
Use for normal registrations.
Use to read register reports.
Use to read register reports and reset totals to zero.
Use to program the register.
The S position is a hidden position reserved for
dealer access.
Introduction • 21