Sam4s SPS-300 Series Operator's And Programming Manual page 157

Delete PLU
Note: To delete a PLU, all totals for the PLU must be cleared from Z1, Z2, Stock, PLU
and Not Found PLU reports.
SAM4s SPS-300 Operator's & Programming Manual v1.34
1. From the PLU PROGRAMMING screen, press 1 to display the DELETE PLU
screen:
DELETE PLU
0.DELETE ONE PLU
1.DELETE PLU RANGE
2. Press 0 to delete an individual PLU. The PLU NUMBER screen displays:
PLU NUMBER
* ENTER PLU NUMBER
AND PUSH PLU, OR
* PRESS A PLU KEY ON
THE KEYBOARD
3. Enter the number of the PLU you wish to delete, or press a PLU key on the
keyboard, or press modifier key followed by a the PLU key on the keyboard.
The CONFIRM DELETE screen displays:
CONFIRM DELETE
ARE YOU SURE YOU
WISH TO DELETE PLU#
CASH=DELETE
CLEAR=ABORT
4. Press CASH to delete the PLU; press CLEAR to return to the PLU DELETE
screen without deleting the PLU.
0

Program Mode Programming • 157