Clerk Report - Sam4s SPS-300 Series Operator's And Programming Manual

Group Programming - Reference Information
Option
DESC
ADD TO GROUP TOTAL
SEND TO KP
KP PORT #
PRINT RED ON KP
SAM4s SPS-300 Operator's & Programming Manual v1.34
3. Press PAGE DOWN to view the second page of group programming:
GROUP #1 PROGRAMMING
RESERVED
RESERVED
RESERVED
GIFT CARD(1-2)
1:ACTIVATE
AGE VERIFICATION (0-5)
4. Refer to the table below to fill the fields of the GROUP PROGRAMMING
screens.
5. Press CASH to return to the GROUP PROGRAMMING screen. Continue to
program groups as necessary. Press CLEAR to return to the PROGRAM
MODE screen.
Entry
Alpha
numeric
12 character
Y or N
Y or N
Y or N
Y or N
2:ADD
Description
You can program a descriptor for each group. Type the
descriptor using the Program Overlay or by using the
descriptor code method (see page 117.). The overlay is
automatically activated when the cursor is pointing at
the DESC field. The default descriptors are GROUP 1,
GROUP 2, etc.
Select N if you do not wish this groups total to be
added to the total of all groups on the Group report.
Select Y if you wish to send PLU's reporting to this
group to a kitchen printer.
For SAT: Select Y or N to direct items to the device
attached to port 1-4 of the server register. Use the R
option (Y or N) to print a kitchen requisition at the
register.
For SER: Select Y or N to direct items to the device
attached to port 1-4 of a satellite register. (You must
set the register number where the KP is attached at IRC
programming, see page 129.)
Select Y if you wish items reporting to this group to
print in red on the kitchen printer. (Note, the kitchen
printer must have red/black printing capability, and this
option does not apply to the register receipt printer.)
0

0
Program Mode Programming • 161