Removing The Roll From The Printer - Canon TM-355 Online Manual

Removing the Roll from the Printer

Remove rolls from the printer as follows.
Note
• If you need to cut a printed roll, cut the roll paper at the desired position. •
Cutting Roll Paper
1. 1. Select paper settings display area on Home screen.
2. 2. Select Remove paper.
3. 3. Select Yes.
The roll is rewound.
Important
• • If Manage remaining roll amount is set to Barcodes in the operation panel menu, a barcode is
printed on the leading edge of the roll paper.
Do not remove the roll before the barcode is printed. You will be unable to keep track of the
amount of roll paper left.
Keeping Track of the Amount of Roll Paper Left
4. Tilt the operation panel back. 4.
211