CHAPTER 3
P. Cassette Paper Sensor
1) Remove the high-voltage power supply
unit according to the high-voltage power
supply unit removal procedure on page
3-61.
2) Unhook the claw, disconnect the con-
nector, and then remove the sensor
holder.
Claw
Connector
Sensor holder
Cassette paper sensor
Figure 3-5-14
3) Unhook the 2 claws from the sensor
holder and then remove the cassette
paper sensor.
3 - 42
Q. Face-down Tray Paper Full Sensor
1) Remove the top cover unit.
2) Unhook the claw, disconnect the con-
nector, and then remove the face-down
tray paper full sensor.