Developing System; Removing The Developing Assembly; Removing The Blade Assembly - Canon NP6218 Service Manual

E. Developing System

1. Removing the Developing Assembly

1) Open the copier's front door.
2) Operate the open/close lever to open the top body.
3) Turn the locking lever
4) Remove the screw
5) Pull the developing assembly

2. Removing the Blade Assembly

1) Remove the developing assembly from the copier.
2) Remove the four screws
COPYRIGHT © 1997 CANON INC.
clockwise to unlock the developing assembly.
.
slowly to the front.
Figure 4-329
, and remove the developing cover
Figure 4-330
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
3 2 1
.
4-47