V Lvps Card Assembly Removal - Lexmark C935 Service Manual

24V LVPS card assembly removal

1. Disconnect the three connectors from the 24V LVPS card assembly (A).
2. Remove the three screws securing the 24V LVPS card assembly (A).
3. Remove the 24V LVPS card assembly (A).
5V LVPS card bracket assembly removal
1. Remove the rear upper cooling fan bracket assembly. See
removal" on page
2. Remove the developer / transfer roll HVPS card assembly. See
assembly removal" on page
3. Remove the lower printer engine card bracket assembly. See
removal" on page
4. Disconnect the six connectors from the 5V LVPS card bracket assembly (A).
5. Release the harnesses from the clamps.
4-111.
4-112.
4-92.
A
"Rear upper cooling fan bracket assembly
"Developer / transfer roll HVPS card
"Lower printer engine card bracket assembly
Repair information
5057-XXX
Previous
Next
Go Back
4-97