5022-xxx
Front access door 5 V interlock switch removal
See
"Front door 5 V interlock switch" on page 7-7
1.
Remove the LVPS. See
2.
Disconnect the JINT1 connector (A) from the system card.
3.
Open the top access door.
4.
Remove the gearbox shield. See
5.
Remove the interlock switch mounting screw (B) from the right side of the printer.
6.
Remove the cable from cable guide, and remove the 5 V interlock switch.
4-54
Service Manual
for the part number.
"Low voltage power supply (LVPS) removal" on page
A
"Gearbox shield removal" on page
B
4-65.
4-19.