Switch (Sheet Through) Static Jam - Lexmark X940e Service Manual

Step
10 Check the MPF/transport drive motor for proper connection.
Is the above component properly connected?
11 Perform a print test.
Does the error continue?

290.00 Switch (sheet through) static jam

Step
1 Check the media path.
Is the media path free of media or media fragments?
2 Check the sensor (sheet through) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SCANNER TESTS.
3. Touch Sensor Tests.
4. Touch Sheet through.
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked?
3 Check the sensor (sheet through) for proper connection.
Is the above component properly connected?
4 Place an undamaged document in the ADF, and perform a
ADF test.
Does the error remain?
5 Place an undamaged document in the ADF, and perform a
ADF test.
Does the error remain?
Check
Check
Yes
Replace the MPF/
Replace the
transport drive
connection.
motor .
Go to "MPF /
transport drive
motor assembly
removal" on
page 4-102.
Replace the lower Problem solved.
printer engine card
assembly.
Go to "Lower
printer engine
card assembly
removal" on
page 4-77.
Yes
Go to step 2. Remove any
media or media
fragments.
Go to step 4. Go to step 3.
Replace the Replace the
sensor (sheet connection.
through).
Go to "Sensor
(sheet through)
removal" on
page 4-155.
Replace the ADF Problem solved.
controller card
assembly.
Go to "ADF
controller card
assembly
removal" on
page 4-135.
Go to step 5.
Replace the RIP Problem solved.
card assembly.
Go to "RIP card
assembly
removal" on
page 4-71.
Diagnostic information
7510-XXX
No
No
2-63