D-Link xStack DGS-3600 Series Cli Manual page 357
D-link xstack dgs-3600 series layer 3 gigabit ethernet managed switch
Hide thumbs
Also See for xStack DGS-3600 Series:
- User manual (433 pages) ,
- Hardware installation manual (66 pages) ,
- Reference manual (546 pages)
Table of Contents
Advertisement
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
show mac_notification
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the Switch's MAC address table notification global settings:
show mac_notification ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display all port's MAC address table notification status settings:
DGS-3627:5#config mac_notification ports 7 enable
Command: config mac_notification ports 7 enable
Success.
DGS-3627:5#
Used to display the Switch's MAC address table notification global
settings
show mac_notification
This command is used to display the Switch's MAC address table
notification global settings.
None.
None.
DGS-3627:5#show mac_notification
Command: show mac_notification
Global Mac Notification Settings
State
: Enabled
Interval
: 1
History Size : 1
DGS-3627:5#
Used to display the Switch's MAC address table notification status
settings
show mac_notification ports <portlist>
This command is used to display the Switch's MAC address table
notification status settings.
<portlist> - Specify a port or group of ports to be viewed. The
beginning and end of the port list range are separated by a dash. Non-
contiguous portlist entries are separated by a comma. (ex: 1-3,7-9)
Entering this command without the parameter will display the MAC
notification table for all ports.
None.
DGS-3627:5#show mac_notification ports
Command: show mac_notification ports
Port # MAC Address Table Notification State
------
-----------------------------------------------------
1
Disabled
2
Disabled
354
Advertisement
Table of Contents
