D-Link xStack DGS-3600 Series Cli Manual page 389

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
To configure the SSH server:
DGS-3627:5# config ssh server maxsession 2 contimeout 300 authfail 2
Command: config ssh server maxsession 2 contimeout 300 authfail 2
Success.
DGS-3627:5#
show ssh server
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To display the SSH server:
config ssh user
Purpose
Syntax
Description
Parameters
Used to display the SSH server setting.
show ssh server
This command allows users to display the current SSH server
setting.
None.
None.
DGS-3627:5# show ssh server
Command: show ssh server
SSH Server Status
SSH Max Session
Connection timeout
Authenticate failed attempts
Rekey timeout
port
DGS-3627:5#
Used to configure the SSH user.
config ssh user <username> authmode [hostbased [hostname
<domain_name> | hostname_IP <domain_name> <ipaddr>] |
password | publickey]
This command allows configuration of the SSH user authentication
method.
<username> - Enter a username of no more than 15 characters to
identify the SSH user.
authmode – Specifies the authentication mode of the SSH user
wishing to log on to the Switch. The administrator may choose
between:
•
hostbased – This parameter should be chosen if the user
wishes to use a remote SSH server for authentication
purposes. Choosing this parameter requires the user to
input the following information to identify the SSH user.
•
hostname <domain_name> - Enter an alphanumeric string
of up to 32 characters identifying the remote SSH user.
•
hostname_IP <domain_name> <ipaddr> - Enter the
hostname and the corresponding IP address of the SSH
: Disabled
: 8
: 300
: 2
: never
: 22
386