D-Link xStack DGS-3600 Series Cli Manual page 78

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Example usage:
To display the switch history log:
DGS-3627:5#show log
Command: show log
Index Date
----- -------------
5 2006-08-21
4 2006-08-21
3 2006-08-21
2 2006-08-21
1 2006-08-21
DGS-3627:5#
show attack_log
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the attack log:
DGS-3627:5#show attack_log index 1-2
Command: show attack_log index 1-2
Index Date
----- ----------------
2 2006-04-25
1 2006-04-25
DGS-3627:5#
Time Log Text
------------------- ----------------------------------------------------
00:01:09 Successful login through Console (Username: Anonymous,
IP:10.53.13.202, MAC: 00-0C-6E-6B-EB-0C)
00:00:14 System started up
00:00:06 Port 1 link up, 100Mbps FULL duplex
00:00:01 Spanning Tree Protocol is disabled
00:06:31 Configuration saved to flash (Username: Anonymous)
Used to display the switch history of attack log files.
show attack_log {unit <unit_id 1-12>} {index <value_list>}
This command will display the contents of the attack log of the
Switch. This log displays the time and date of a possible attack on
the switch, such as a spoofing attack.
unit <unit_id 1-12> - Select the switch in the switch stack for which
to view attack log files.
index <value list>
beginning at 1 and ending at the value specified by the user in the
<value_list> field.
If no parameter is specified, all history log entries will be displayed.
None.
Time Log Text
----------- ----------------------------------------------------
12:38:00 Possible spoofing attack from 000d010023001 port 23
12:37:42 Possible spoofing attack from 000d010023001 port 23
−
This command will display the history log,
75