D-Link xStack DGS-3600 Series Cli Manual page 312
D-link xstack dgs-3600 series layer 3 gigabit ethernet managed switch
Hide thumbs
Also See for xStack DGS-3600 Series:
- User manual (433 pages) ,
- Hardware installation manual (66 pages) ,
- Reference manual (546 pages)
Table of Contents
Advertisement
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
DGS-3627:5#config dvmrp ipif System neighbor_timeout 30 metric 1 probe 5
Command: config dvmrp ipif System neighbor_timeout 30 metric 1 probe 5
Success
DGS-3627:5#
enable dvmrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable DVMRP:
disable dvmrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable DVMRP:
show dvmrp routing_table
Purpose
Syntax
Used to enable DVMRP.
enable dvmrp
This command, in combination with the disable dvmrp command below,
is used to enable and disable DVMRP on the Switch.
None.
Only administrator-level and operator-level users can issue this
command.
DGS-3627:5#enable dvmrp
Command: enable dvmrp
Success.
DGS-3627:5#
Used to disable DVMRP.
disable dvmrp
This command is used, in combination with the enable dvmrp command
above, is used to enable and disable DVMRP on the Switch.
None.
Only administrator-level and operator-level users can issue this
command.
DGS-3627:5#disable dvmrp
Command: disable dvmrp
Success.
DGS-3627:5#
Used to display the current DVMRP routing table.
show dvmrp routing table [ipaddress <network_address>]
309
Advertisement
Table of Contents
