D-Link xStack DGS-3600 Series Cli Manual page 52

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
show trusted_host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the list of trust hosts:
DGS-3627:5#create trusted_host 10.48.74.121
Command: create trusted_host 10.48.74.121
Success.
DGS-3627:5#
Used to display a list of trusted hosts entered on the Switch using
the create trusted_host command above.
show trusted_host <network_address>
This command is used to display a list of trusted hosts entered on
the Switch using the create trusted_host command above.
<network_address> − IP address and netmask of the trusted host
to be viewed. The address and mask information can be specified
using the traditional format (for example, 10.1.2.3/255.0.0.0 or in
CIDR format, 10.1.2.3/8).
Only administrator-level and operator-level users can issue this
command.
DGS-3627:5#show trusted_host
Command: show trusted_host
Management Stations
IP Address
-----------------------
10.53.13.94
Total Entries: 1
DGS-3627:5#
49