D-Link xStack DGS-3600 Series Cli Manual page 226

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
show auth_statistics
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current authentication statistics for port 1:
DGS-3627:5#show auth_statistics ports 1
Command: show auth_statistics ports 1
Port number : 1
EapolFramesRx
EapolFramesTx
EapolStartFramesRx
EapolReqIdFramesTx
EapolLogoffFramesRx
EapolReqFramesTx
EapolRespIdFramesRx
EapolRespFramesRx
InvalidEapolFramesRx
EapLengthErrorFramesRx
LastEapolFrameVersion
LastEapolFrameSource
CTRL+C ESC q
create 802.1x user
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To create an 802.1x user:
Used to display the current authentication statistics.
show auth_statistics {ports <portlist> | all]}
The show auth_statistics command is used to display the current
authentication statistics of the Switch on a per port basis.
ports <portlist> − Specifies a port or range of ports. The beginning and end
of the port list range are separated by a dash. Non-contiguous portlist entries
are separated by a comma. (ex: 1-3,7-9)
Only administrator-level and operator-level users can issue this command.
Quit SPACE n
Used to create a new 802.1x user.
create 802.1x user <username 15>
The create 802.1x user command is used to create new 802.1x users.
<username 15> − A username of up to 15 alphanumeric characters in
length.
Only administrator-level users can issue this command.
DGS-3627:5#create 802.1x user ctsnow
Command: create 802.1x user ctsnow
Enter a case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DGS-3627:5#
0
0
0
0
0
0
0
0
0
0
0
00-00-00-00-00-00
Next Page Enter Next Entry
223
a All