D-Link xStack DGS-3600 Series Cli Manual page 396

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
config ssl cachetimeout timeout
Parameters
Restrictions
Example usage:
To set the SSL cachetimeout for 7200 seconds:
DGS-3627:5#config ssl cachetimeout 7200
Command: config ssl cachetimeout 7200
Success.
DGS-3627:5#
show ssl cachetimeout
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the SSL cache timeout on the Switch:
show ssl
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the SSL status on the Switch:
process.
timeout <value 60-86400> - Enter a timeout value between 60 and 86400
seconds to specify the total time an SSL key exchange ID stays valid before
the SSL module will require a new, full SSL negotiation for connection. The
default cache timeout is 600 seconds
Only administrator-level and operator-level users can issue this command.
Used to show the SSL cache timeout.
show ssl cachetimeout
Entering this command will allow the user to view the SSL cache
timeout currently implemented on the Switch.
None.
None.
DGS-3627:5#show ssl cachetimeout
Command: show ssl cachetimeout
Cache timeout is 600 second(s).
DGS-3627:5#
Used to view the SSL status and the certificate file status on the Switch.
show ssl {certificate}
This command is used to view the SSL status on the Switch.
{certificate} – Use this parameter to display the SSL certificate file
information currently implemented on the Switch.
None.
393