D-Link xStack DGS-3600 Series Cli Manual page 66

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Example usage:
To view the directory files on the internal flash drive:
DGS-3627:5#dir c:
Command: dir C:\
-------------------------------------------------------------------------------------------------------
Current Unit ID: 1
Current Directory: C:\
File Name
--------------------------------
LOG.TXT
RUN.HAD
STARTUP.CFG
-----------------------------------------------------------------------------------------------------
Total Files
Total Size
Free Space
'*' means boot up section
DGS-3627:5#
copy
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To copy a file:
DGS-3627:5#copy C:\ abc.cfg C:\ def.txt
Command: copy C:\ abc.cfg C:\ def.txt
Please wait, do not power off!
DGS-3627:5#
(*)
(*)
Used to copy a file.
copy {<drive_id>} <pathname 64> {{unit_id 1-12>} <drive_id>}
<pathname 64>
This command is used to copy a file from a source location and
paste it to a host location. This command is only operable for the
storage media accessory.
<drive_id> - Enter the drive ID of the internal flash drive where the
file is to be copied from.
<pathname 64> - Enter the path and name of the file to be renamed.
unit <unit_id 1-12> - Select the switch in the switch stack where the
firmware image is to be copied to, denoted by unit ID number.
<drive_id> - Enter the drive ID of the internal flash drive where the
file is to be copied to.
<pathname 64> - Enter the path and name of the file to be renamed.
Only administrator-level and operator-level users can issue this
command.
Process ......................Done.
Size(byte)
-----------------------
520124 bytes
2678500 bytes
11007 bytes
4
9293625 bytes
2097152 bytes
63
Update time
-----------------------
2007/10/27 16:56
2007/10/27 16:25
2007/10/27 16:24