D-Link xStack DGS-3600 Series Cli Manual page 69

D-link xstack dgs-3600 series layer 3 gigabit ethernet managed switch
Hide thumbs Also See for xStack DGS-3600 Series:
Table of Contents

Advertisement

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Example usage:
To view the storage media accessory information:
ping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To ping the IP address 10.48.74.121 four times:
DGS-3627:5#ping 10.48.74.121 times 4
Command: ping 10.48.74.121 times 4
Reply from 10.48.74.121, time<10ms
Reply from 10.48.74.121, time<10ms
Reply from 10.48.74.121, time<10ms
Reply from 10.48.74.121, time<10ms
Ping statistics for 10.48.74.121
Packets: Sent =4, Received =4, Lost =0
DGS-3627:5#
ping6
Purpose
Syntax
Description
Parameters
DGS-3627:5#config file_system_version 2
Command: config file_system_version 2
Are you sure you want to update the file system version? (y/n) n
DGS-3627:5#
Used to test the connectivity between network devices.
ping <ipaddr> {times <value 1-255>} {timeout <sec 1-99>}
The Ping command sends Internet Control Message Protocol (ICMP)
echo messages to a remote IP address. The remote IP address will
then "echo" or return the message. This is used to confirm
connectivity between the Switch and the remote device.
<ipaddr> - Specifies the IP address of the host.
times <value 1-255> - The number of individual ICMP echo
messages to be sent. A value of 0 will send an infinite ICMP echo
messages. The maximum value is 255. The default is 0.
timeout <sec 1-99> - Defines the time-out period while waiting for a
response from the remote device. A value of 1 to 99 seconds can be
specified. The default is 1 second.
None.
Used to test the connectivity between IPv6 ready network devices.
ping6 <ipv6addr> {times <value 1-255> | size <value 1-6000>}
{timeout <value 1-10>}
The ping6 command sends Internet Control Message Protocol
(ICMPv6) echo messages to a remote IPv6 address. The remote IP
address will then "echo" or return the message. This is used to
confirm connectivity between the Switch and the remote device.
<ipv6addr> - Specifies the IP address of the host.
times <value 1-255> - The number of individual ICMP echo
66

Advertisement

Table of Contents
loading

Table of Contents