D-Link xStack DGS-3600 Series Cli Manual page 407
D-link xstack dgs-3600 series layer 3 gigabit ethernet managed switch
Hide thumbs
Also See for xStack DGS-3600 Series:
- User manual (433 pages) ,
- Hardware installation manual (66 pages) ,
- Reference manual (546 pages)
Table of Contents
Advertisement
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
config lldp dot1_tlv_pvid
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure exclude the VLAN nameTLV from the outbound LLDP advertisements for all ports:
config lldp dot1_tlv_protocol_vid
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure exclude the port and protocol VLAN ID TLV from the outbound LLDP advertisements for all ports:
Used to configure an individual port or group of ports to exclude one
or more of IEEE 802.1 organization port VLAN ID TLV data types from
outbound LLDP advertisements.
config lldp ports [<portlist>|all] dot1_tlv_pvid [enable | disable]
This TLV optional data type determines whether the IEEE 802.1
organization defined port VLAN TLV transmission is allowed on a
given LLDP transmission capable port.
<portlist>- Use this parameter to define ports to be configured.
all – Use this parameter to set all ports in the system.
dot1_tlv_pvid – This TLV optional data type determines whether the
IEEE 802.1 organization defined port VLAN ID TLV transmission is
allowed on a given LLDP transmission capable port. The default state
is disabled.
Only administrator-level and operator-level users can issue this
command.
DGS-3627:5#config lldp ports all dot1_tlv_pvid enable
Command: config lldp ports all dot1_tlv_pvid enable
Success.
DGS-3627:5#
Used to configure an individual port or group of ports to exclude one
or more of IEEE 802.1 organization port and protocol VLAN ID TLV
data types from outbound LLDP advertisements.
config lldp ports [<portlist>|all] dot1_tlv_protocol_vid [vlan [all |
<vlan_name 32> ] | vlanid <vidlist> ] [enable | disable]
This TLV optional data type indicates whether the corresponding
Local System's port and protocol VLAN ID instance will be transmitted
on the port. If a port is associated with multiple protocol VLANs, those
enabled port and protocol VLAN IDs will be advertised.
<portlist>- Use this parameter to define ports to be configured.
all – Use this parameter to set all ports in the system.
dot1_tlv_protocol_vid – This TLV optional data type determines
whether the IEEE 802.1 organization defined port and protocol VLAN
ID TLV transmission is allowed on a given LLDP transmission capable
port. The default state is disabled.
Only administrator-level and operator-level users can issue this
command.
404
Advertisement
Table of Contents
