D-Link xStack DGS-3600 Series Cli Manual page 310

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
show rip
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display RIP configuration:
DGS-3627:5#show rip
Command: show rip
RIP Global State : Disabled
RIP Interface Settings
Interface
-------------
System
Total Entries : 1
DGS-3627:5#
Example usage:
To display RIP configurations by IP interface:
DGS-3627:5#show rip ipif System
Command: show rip ipif System
RIP Interface Settings
Interface Name: System
Interface Metric: 1
TX Mode: V2 Only
Authentication: Disabled
Total Entries: 1
DGS-3627:5#
Used to display the RIP configuration and statistics for the Switch.
show rip {ipif <ipif_name 12>}
This command will display the RIP configuration and statistics for a
given IP interface or for all IP interfaces.
ipif <ipif_name 12> − The name of the IP interface for which to display
the RIP configuration and settings. If this parameter is not specified,
the show rip command will display the global RIP configuration for the
Switch.
None.
IP Address TX Mode
------------------ ----------
10.41.44.33/8 Disabled
RX Mode Authen-
tication
------------- ----------
Disabled Disabled Disabled
IP Address: 10.53.13.33/8 (Link Up)
Administrative State: Disabled
RX Mode: V1 or V2
307
State
-----------